BMW E-Series

BMW 5 Series Petrol Engines 2002-2008

E65 - 730i - 258HP:
Power: 258 HP -> 272 HP (+14 HP)
Torque: 300 NM -> 320 NM (+20 NM)

E65 - 735i - 272HP:
Power: 272 HP -> 287 HP (+15 HP)
Torque: 360 NM -> 380 NM (+20 NM)

E65 - 740i - 306HP:
Power: 306 HP -> 335 HP (+29 HP)
Torque: 390 NM -> 425 NM (+35 NM)

E65 - 745i - 333HP:
Power: 333 HP -> 353 HP (+20 HP)
Torque: 450 NM -> 470 NM (+20 NM)

E65 - 750i - 367HP:
Power: 367 HP -> 394 HP (+27 HP)
Torque: 490 NM -> 520 NM (+30 NM)

E65 - 760i - 445HP:
Power: 445 HP -> 462 HP (+17 HP)
Torque: 600 NM -> 630 NM (+30 NM)

BMW F-Series

BMW 7 Series Petrol Engines 2009-2015

F01 - 740i - 326HP:
Power: 326 HP -> 370 HP (+44 HP)
Torque: 450 NM -> 520 NM (+70 NM)

F01 - 750i - 407HP:
Power: 407 HP -> 520 HP (+113 HP)
Torque: 600 NM -> 700 NM (+100 NM)

F01 - 750i - 450HP:
Power: 450 HP -> 540 HP (+90 HP)
Torque: 650 NM -> 780 NM (+130 NM)

F01 - 750i Valvetronic - 510HP:
Power: 510 HP -> 540 HP (+30 HP)
Torque: 750 NM -> 780 NM (+30 NM)

F01 - 760i - 544HP:
Power: 544 HP -> 600 HP (+56 HP)
Torque: 750 NM -> 900 NM (+150 NM)

BMW G-Series

BMW 7 Series Petrol Engines 2016-2019

G11/12 - 720i - 184HP:
Power: 184 HP -> 250 HP (+66 HP)
Torque: 290 NM -> 440 NM (+150 NM)

G11/12 - 730i - 258HP:
Power: 258 HP -> 287 HP (+29 HP)
Torque: 400 NM -> 450 NM (+50 NM)

G11/12 - 740e IPerformance - 326HP:
Power: 326 HP -> 400 HP (+74 HP)
Torque: 500 NM -> 580 NM (+80 NM)

G11/12 - 740i - 326HP:
Power: 326 HP -> 400 HP (+74 HP)
Torque: 450 NM -> 580 NM (+130 NM)

G11/12 - 750i - 450HP:
Power: 450 HP -> 540 HP (+90 HP)
Torque: 650 NM -> 780 NM (+130 NM)

G11/12 - M760i - 610HP:
Power: 610 HP -> 680 HP (+70 HP)
Torque: 800 NM -> 920 NM (+120 NM)

Price: from £200
(while you wait or mobile service)

ECU Remapping Service is also available as a postal service
Price: from £180 (postal service)

Additional Options with or without Stage 1:

DTC Delete / DeCat / Flaps / VMax / Start Stop Off / 
/ Pop and Bang Crackle Maps and more.

If your vehicle data is not listed here or you need more info about our services, Stage 2 or additional options please do not hesitate to contact us.

Some important info:

We always do a full vehicle diagnostics and datalog checks to make sure your vehicle is ready for remap.
Software backup before we start any remapping works.
We prefer to program the ECU by using an on bench method. It means the DDE/DME has to be removed from the car, but it is safe and usually takes only 10-30 mins to do so, unless the customer wants us to use OBD method.
On bench ECU remapping means we are able to do a full software backup. This is very important not just because it is the most safe way to do the programming but also the customer has an opportunity to bring his car back to stock for any reason in the future, so we`re able to fully restore it to the initial state as it was before the remap.
Please remember that most BMW ECU types are done without any need for it to be physically opened.
Please do not hesitate to contact us if you have any questions.

 Contact Us Call Us Email Us