BMW E-Series

BMW X3 Series Petrol Engines 2004-2010

E83 - 2.0i - 150HP:
Power: 150 HP -> 165 HP (+15 HP)
Torque: 200 NM -> 220 NM (+20 NM)

E83 - 2.5i - 214HP:
Power: 214 HP -> 231 HP (+17 HP)
Torque: 250 NM -> 271 NM (+21 NM)

E83 - 3.0i - 231HP:
Power: 231 HP -> 245 HP (+14 HP)
Torque: 300 NM -> 325 NM (+25 NM)

BMW F-Series

BMW X3 Series Petrol Engines 2011-2017

F25 - 2.0i - 184HP:
Power: 184 HP -> 250 HP (+66 HP)
Torque: 270 NM -> 440 NM (+170 NM)

F25 - 2.8i Turbo - 245HP:
Power: 245 HP -> 280 HP (+35 HP)
Torque: 350 NM -> 430 NM (+80 NM)

F25 - 3.5i - 306HP:
Power: 306 HP -> 365 HP (+59 HP)
Torque: 400 NM -> 520 NM (+120 NM)

BMW X3 M Series Petrol Engines 2019->

F97 - 3.0 xDrive Steptronic - 480HP:
Power: 480 HP -> 575 HP (+95 HP)
Torque: 600 NM -> 800 NM (+200 NM)

F97 - 3.0 xDrive Steptronic Competition - 510HP:
Power: 510 HP -> 575 HP (+65 HP)
Torque: 600 NM -> 720 NM (+120 NM)

BMW G-Series

BMW X3 Series Petrol Engines 2017->

G01/08 - sDrive20i - 170HP:
Power: 170 HP -> 210 HP (+40 HP)
Torque: 250 NM -> 310 NM (+60 NM)

G01/08 - sDrive20i - 184HP:
Power: 184 HP -> 250 HP (+66 HP)
Torque: 290 NM -> 440 NM (+150 NM)

G01/08 - 30e - 252HP:
Power: 252 HP -> 340 HP (+88 HP)
Torque: 420 NM -> 550 NM (+130 NM)

G01/08 - xDrive30e - 292HP:
Power: 292 HP -> 400 HP (+108 HP)
Torque: 420 NM -> 700 NM (+280 NM)

G01/08 - xDrive30i - 252HP:
Power: 252 HP -> 287 HP (+35 HP)
Torque: 350 NM -> 450 NM (+100 NM)

G01/08 - M40i - 360HP:
Power: 360 HP -> 400 HP (+40 HP)
Torque: 500 NM -> 580 NM (+80 NM)

Price: from £200
(while you wait or mobile service)

ECU Remapping Service is also available as a postal service
Price: from £180 (postal service)

Additional Options with or without Stage 1:

DTC Delete / DeCat / Flaps / VMax / Start Stop Off / 
/ Pop and Bang Crackle Maps and more.

If your vehicle data is not listed here or you need more info about our services, Stage 2 or additional options please do not hesitate to contact us.

Some important info:

We always do a full vehicle diagnostics and datalog checks to make sure your vehicle is ready for remap.
Software backup before we start any remapping works.
We prefer to program the ECU by using an on bench method. It means the DDE/DME has to be removed from the car, but it is safe and usually takes only 10-30 mins to do so, unless the customer wants us to use OBD method.
On bench ECU remapping means we are able to do a full software backup. This is very important not just because it is the most safe way to do the programming but also the customer has an opportunity to bring his car back to stock for any reason in the future, so we`re able to fully restore it to the initial state as it was before the remap.
Please remember that most BMW ECU types are done without any need for it to be physically opened.
Please do not hesitate to contact us if you have any questions.

 Contact Us Call Us Email Us