BMW E Series 

BMW X5 Series Diesel Engines 2008-2014

E71 - 3.0d - 211HP:
Power: 211 HP -> 280 HP (+69 HP)
Torque: 520 NM -> 600 NM (+80 NM)

E71 - 3.0d - 235HP:
Power: 235 HP -> 300 HP (+65 HP)
Torque: 520 NM -> 620 NM (+100 NM)

E71 - 3.0d - 245HP:
Power: 245 HP -> 300 HP (+55 HP)
Torque: 520 NM -> 620 NM (+100 NM)

E71 - 3.5d - 286HP:
Power: 286 HP -> 340 HP (+54 HP)
Torque: 580 NM -> 680 NM (+100 NM)

E71 - 4.0d - 306HP:
Power: 306 HP -> 350 HP (+44 HP)
Torque: 600 NM -> 680 NM (+80 NM)

E71 - M 5.0d - 381HP:
Power: 381 HP -> 420 HP (+39 HP)
Torque: 740 NM -> 800 NM (+60 NM)

BMW F Series

 BMW X5 Series Diesel Engines 2014-2018

F16 - 3.0d - 258HP:
Power: 258 HP -> 310 HP (+52 HP)
Torque: 560 NM -> 650 NM (+90 NM)

F16 - 4.0d - 313HP:
Power: 313 HP -> 365 HP (+52 HP)
Torque: 630 NM -> 700 NM (+70 NM)

F16 - M 5.0d - 381HP:
Power: 381 HP -> 420 HP (+39 HP)
Torque: 740 NM -> 800 NM (+60 NM)

BMW G Series

BMW X3 Series Diesel Engines 2019-> 

G06 - xDrive30d - 265HP:
Power: 265 HP -> 310 HP (+45 HP)
Torque: 620 NM -> 720 NM (+100 NM)

G06 - xDrive30d MHEV - 286HP:
Power: 286 HP -> 330 HP (+44 HP)
Torque: 650 NM -> 720 NM (+70 NM)

G06 - xDrive40d MHEV - 340HP:
Power: 340 HP -> 400 HP (+60 HP)
Torque: 700 NM -> 750 NM (+50 NM)

G05 - xDrive M50d - 400HP:
Power: 400 HP -> 430 HP (+30 HP)
Torque: 760 NM -> 820 NM (+60 NM)

Price: from £200
(while you wait or mobile service)

ECU Remapping Service is also available as a postal service
Price: from £180 (postal service)

Additional Options with or without Stage 1:

DTC Delete / DPF Off / EGR Off / Flaps / VMax / 
Start Stop Off / Pop and Bang Crackle Maps and more.

If your vehicle data is not listed here or you need more info about our services, Stage 2 or additional options please do not hesitate to contact us.

Some important info:

We always do a full vehicle diagnostics and datalog checks to make sure your vehicle is ready for remap.
Software backup before we start any remapping works.
We prefer to program the ECU by using an on bench method. It means the DDE/DME has to be removed from the car, but it is safe and usually takes only 10-30 mins to do so, unless the customer wants us to use OBD method.
On bench ECU remapping means we are able to do a full software backup. This is very important not just because it is the most safe way to do the programming but also the customer has an opportunity to bring his car back to stock for any reason in the future, so we`re able to fully restore it to the initial state as it was before the remap.
Please remember that most BMW ECU types are done without any need for it to be physically opened.
Please do not hesitate to contact us if you have any questions.

 Contact Us Call Us Email Us