BMW E-Series

BMW X1 Series Petrol Engines 2009-2012

E84 - 1.8i - 136HP:
Power: 136 HP -> 165 HP (+29 HP)
Torque: 200 NM -> 220 NM (+20 NM)

E84 - 1.8i - 150HP:
Power: 150 HP -> 165 HP (+15 HP)
Torque: 200 NM -> 220 NM (+20 NM)

BMW X1 Series Petrol Engines 2012-2015

E84 - 1.8i - 150HP:
Power: 150 HP -> 160 HP (+10 HP)
Torque: 200 NM -> 220 NM (+20 NM)

E84 - 2.0i - 184HP:
Power: 184 HP -> 260 HP (+76 HP)
Torque: 270 NM -> 420 NM (+150 NM)

E84 - 2.8i - 245HP:
Power: 245 HP -> 290 HP (+45 HP)
Torque: 350 NM -> 450 NM (+100 NM)

BMW F-Series

BMW X1 Series Petrol Engines 2015-2018

F48 - sDrive18i - 136HP:
Power: 136 HP -> 170 HP (+34 HP)
Torque: 220 NM -> 280 NM (+60 NM)

F48 - sDrive20i - 192HP:
Power: 192 HP -> 250 HP (+58 HP)
Torque: 280 NM -> 440 NM (+160 NM)

F48 - xDrive20i - 192HP:
Power: 192 HP -> 250 HP (+58 HP)
Torque: 280 NM -> 420 NM (+140 NM)

BMW X1 LCI Series Petrol Engines 2019->

F48 LCI - sDrive18i - 140HP:
Power: 140 HP -> 170 HP (+30 HP)
Torque: 220 NM -> 280 NM (+60 NM)

F48 LCI - sDrive20i - 192HP:
Power: 192 HP -> 250 HP (+58 HP)
Torque: 280 NM -> 440 NM (+160 NM)

F48 LCI - xDrive20i - 192HP:
Power: 192 HP -> 250 HP (+58 HP)
Torque: 280 NM -> 440 NM (+160 NM)

F48 LCI - xDrive25i - 231HP:
Power: 231 HP -> 290 HP (+59 HP)
Torque: 350 NM -> 400 NM (+50 NM)

Price: from £200
(while you wait or mobile service)

ECU Remapping Service is also available as a postal service
Price: from £180 (postal service)

Additional Options with or without Stage 1:

DTC Delete / DeCat / Flaps / VMax / Start Stop Off / 
/ Pop and Bang Crackle Maps and more.

If your vehicle data is not listed here or you need more info about our services, Stage 2 or additional options please do not hesitate to contact us.

Some important info:

We always do a full vehicle diagnostics and datalog checks to make sure your vehicle is ready for remap.
Software backup before we start any remapping works.
We prefer to program the ECU by using an on bench method. It means the DDE/DME has to be removed from the car, but it is safe and usually takes only 10-30 mins to do so, unless the customer wants us to use OBD method.
On bench ECU remapping means we are able to do a full software backup. This is very important not just because it is the most safe way to do the programming but also the customer has an opportunity to bring his car back to stock for any reason in the future, so we`re able to fully restore it to the initial state as it was before the remap.
Please remember that most BMW ECU types are done without any need for it to be physically opened.
Please do not hesitate to contact us if you have any questions.

 Contact Us Call Us Email Us